ironing



LYNX NAPKIN FOLDERS

LYNX models are folders for napkins and small pieces.
Maximum output around 900/1200 pieces/hour.
Maximum linen size for LYNX is 570 x 1.000 mm;
for LYNX MINI is 570 x 600mm.
Working table with vacuum unit.
PLC microprocessor which allows to adapt to the piece size, up to 20 programs.
Alarms and messages in the display.
Transport belts in rubber and cotton.
Automatic measurement of linen partial or total piece counter.




COMPACT FLATWORK IRONERS SEXTANS

Flatwork ironer with roll sizes: 2600 and 3300 mm long and diameter 600, 800 and 1000 mm.
Panels in painted steel.
One or two working lanes: one lane for bedsheets and two lanes for tablecloth and smaller pieces.
Length fold (1 or 2 folds) and crossfold (up to 3 folds).
Folding system by photocells and compressed air.
Two types of linen stacker, with possibility to program the number of items stacked. The stacker can be positioned on either side of the machine.
Frequency control.
Feeding and ironing belts are Nomex.




COMPACT FLATWORK IRONERS CEPHEUS

Flatwork ironer with roll sizes: 2600 and 3300 mm wide and 600, 800 and 1000 mm diameter.
Panels in painted steel.
One or two working lanes: one lane for bedsheets and two lanes for tablecloths and small pieces.
Length fold with 1 or 2 folds in two independent lanes.
Folding system by photocells and compressed air.
Frequency control.
Feeding and ironing belts are Nomex.
Touch-screen control: programs can be created with speed control (between 3 and 18 mts/min), temperature and folding parameters.
Automatic stop after cooling down (at 80ºC).
Big output capacity, depending on the residual moisture of the linen, up to 290 kg/hour straight from the high spin washer extractor.




COMPACT FLATWORK IRONER CYGNUS

Roll sizes: 2600 and 3300 mm wide and 600, 800 and 1000 mm diameter.
Panels in painted steel.
Frequency control.
Feeding and ironing belts are Nomex.
Touch-screen control: programs can be created with speed control (between 3 and 18 mts/min) and temperature.
Automatic stop after cooling down (at 80ºC).
Big output capacity, depending on the residual moisture of the linen, up to 290 kg/hour straight from the high spin washer extractor.
Electric, gas or steam heating.
New gas models with radiant burner (increase of 25% more production, available in diametre 800 models and standard in diametre 1000 models).
Powerful exhaust system.




WALL FLATWORK IRONERS CM 2065-2665-3365 TOUCH II

Front feed and return ironer.
New TOUCH II microprocessor, with 7″ touchscreen and 10 preset programs.
Roll dimensions: width 2, 2,6. and 3,3 m., diameter 650 mm.
Frequency Inverter for the ironing speed control.
Panels in skinplate and stainless steel.
Reversing roll. Powerful exhaust system.
EFFICIENT IRON standard.
OPTIMAL IRON standard.
Nomex feeding and ironing belts for an easy operation, top ironing quality and long-lasting belts.
Automatic stop after cooling down (at 80 ºC).
Electric, gas, radiant burner – gas, steam heating.
Efficient gas model with radiant burner (25% production increase).




WALL FLATWORK IRONERS CM 2050-2650-3350 TOUCH II

Front feed and return ironer.
Roll dimensions: width 2, 2,6. and 3,3 m., diameter 500 mm.
Frequency Inverter for the ironing speed control.
New TOUCH II microprocessor, with 7″ touchscreen. 10 preset programs.
Panels in grey skinplate and stainless steel.
Powerful exhaust system.
Reversing roll.
Nomex feeding and ironing belts for an easy operation, top ironing quality and long-lasting belts.
Automatic stop after cooling down (at 80 ºC).
Electric, gas and steam heating.
Efficient gas model with radiant burner (25% production increase).




WALL FLATWORK IRONERS CM 1432-1632-2032 E

Domus ironers are conceived to offer the best performance and productivity with noticeable energetic efficiency and timesaving options.

E R G O N O M I C S

Front feed and return ironer.
Roll dimensions from 1,4 m. to 2,0 m. wide, and diametre 325 mm.
Frequency Inverter for the ironing speed control.

R O B U S T N E S S
Panels in stainless steel and painted steel.
Powerful exhaust system.
Nomex feeding and ironing belts for an easy operation, top ironing quality and long-lasting belts.




WALL FLATWORK IRONERS CM-1420 E

CM-1420 is the smallest model which can dry-iron
flatwork, ideal for reduced spaces.
Front feed and return ironer.
Electronic control : ironing speed and temperature selection.
Roll dimensions: 1,4 m wide and diametre 200 mm.
Frequency Inverter for the ironing speed control.
Nomex feeding and ironing belts for an easy operation, top
ironing quality and long-lasting belts.
Electric heating.




WALL IRONERS Ø 180 -250 mm

User-friendly, reliable, robust and not expensive. The new range of wall
ironers is the ideal choice for those laundries which do not have a big
output but where the investment point matters.

PM-1018- 1218

Microprocessor with push button for start/stop and option between 4 temperatures (50, 100, 150, 180 ºC).
Front feed and return.
Panels in skinplate. Top panels in stainless steel.
Chest in anodized aluminium. Fingerguard.
Electric heating.
Roll covered in polyester and cotton felt in standard model.
Nomex model: possibility to work at higher temperatures, up to 190 ºC.
We recommend to iron the linen with a maximum moisture of 20%.